LED information panel

The LED information panel shows the operating status of the product (e.g. standby, fault).

Standby

Symbol

Meaning

lights up

The product is ready for use. No vehicle is connected to the product.

flashes slowly

Not all requirements for charging are met, e.g.

  • The authorisation process is complete. No vehicle is connected to the product.
  • A vehicle is connected to the product. There is a reason that prevents or pauses the charging process, e.g.
    • The downgrade input is configured to 0 A and currently active.
    • A command from the energy management system.
    • Communication with the connected energy management system was interrupted. The charging current (fallback current) is configured to 0 A.
    • Not enough excess energy available (solar charging).
    • Blackout protection has triggered.
    • Limit value for unbalanced load was exceeded.
    • Operating temperature was exceeded.

flashes rapidly

A vehicle is connected to the product. Authorisation has not occurred.

flashes once

The presented RFID card has been added to the whitelist (in Teach mode).

Colour of the symbol: blue or green (dependent on the configuration)

In Standby operating mode, the product can switch to Sleep mode after 10 minutes to reduce internal consumption. The Sleep mode is configurable and is enabled in the delivery state. It is terminated by plugging in the charging cable or by an authorisation. In Sleep mode, no symbol lights up on the LED information panel.

Charging

Symbol

Meaning

lights up

The charging process is running.

flashes slowly

  • The operating temperature is very high. The charging process is running. The charging current is reduced to avoid overheating and pausing the charging process.
  • Communication with the connected energy management system was interrupted. The charging current (fallback current) is configured to ≥ 6 A.

pulsates

All requirements for charging a vehicle are met. The charging process is paused due to vehicle feedback or was terminated by the vehicle.

Colour of the symbol: blue or green (dependent on the configuration)

Sun

Symbol

Meaning

lights up

The product is in “Sunshine mode”.

pulsates

The product is in “Sunshine+ mode”.

flashes

The Teach mode for RFID cards is enabled (for 60 seconds).

flashes twice

Switching to another charging mode is not permitted during an active charging process. The vehicle must be disconnected from the charging station beforehand.

Colour of the symbol: white

Fault

Symbol

Meaning

lights up

There is a fault that is preventing the vehicle from charging. The fault can only be rectified by a qualified electrician.

flashes

There is a fault that is preventing the vehicle from charging (error during charging process, under / overvoltage).

flashes once

  • The presented RFID card is not included in the whitelist. Authorisation has not occurred.
  • All RFID cards have been removed from the whitelist (master RFID card presented for 10 seconds).
  • The presented RFID card has been removed from the whitelist (in Teach mode).

flashes three times

The RFID card memory is full (max. 10 RFID cards).

Troubleshooting

Colour of the symbol: red